Crankshaft Needle Bearing, Replacing: Notes
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Bearing Installer - Bearing Press Piece :VW207C
- Internal Puller :VAS251635
- Counter Support :VAS251621
Conditions:
- Check the needle bearing -arrow- for damage and if necessary replace the needle bearing.
- The front edges of the internal puller must not be broken off.