Overview - Engine Oil Cooler

WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Engine Oil Cooler

Courtesy of AUDI OF AMERICA, LLC

Sub-Assembly Bracket
- Removing and installing. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .
Bolt
- 15 Nm
Connection
Seal
- Always replace after removing.
- Coat with coolant
Engine Oil Cooler
- See note.
  NOTE: If large quantities of metal shavings or abraded material are found in the engine oil while servicing the engine, the oil passages must be carefully cleaned to prevent subsequent damage. Replace the additional oil spray jet, engine oil cooler and oil filter.
- Removing and installing. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .
Seal
- Always replace after removing.