Oil Separator, Removing And Installing, On Cylinder Head Cover, Version 2: Removing
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the cylinder ignition coils "3 and 4". Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .
-- Disconnect the crankcase ventilation hose -1-.
-- Remove the bolts -arrows- and then remove the oil separator from the crankcase ventilation hose -2- in the direction of -arrow-.