Oil Separator, Removing And Installing, On Cylinder Head Cover, Version 1: Removing
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Remove the ignition coils. Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .
-- Remove the cap -arrow-.
-- Remove the bolts -1 through 6- and the oil separator from the cylinder head cover.
-- Free up the vacuum line.
-- Install the cap.