Oil Pan Lower Section, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Engine oil drained. Refer to ENGINE OIL .

-- Disconnect the connector -1- for the Oil Level Thermal Sensor -G266-.

Vehicles with Plastic Oil Pan Lower Section

-- Remove the bolts -1 through 20-.

-- Remove the oil pan lower section.

Vehicles with Metal Oil Pan Lower Section:

-- Remove the bolts -1 through 20-.

-- Carefully loosen the oil pan lower section from the bond.

Continuation:

-- If the oil pan lower section is replaced, remove the Oil Level Thermal Sensor -G266-. Refer to Oil Level Thermal Sensor -G266-, REMOVING AND INSTALLING .