Oil Separator, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the cylinder ignition coils "3 and 4". Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .
-- Loosen the hose clamp -1- and remove the hose from EVAP Canister Purge Regulator Valve 1 -N80-.
-- Remove the bolt -2- and then remove the crankcase ventilation hose -3- from oil separator.
-- Remove the bolts -arrows- and the oil separator.