Secondary Air Injection Pump Motor -V101-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to Noise Insulation, Removing And Installing .
-- Disconnect the connector -1-.
-- Press both the release buttons -2 to 3- and remove the lines from the Secondary Air Injection Pump Motor -V101-.
-- Remove the nuts -arrows- and the Secondary Air Injection Pump Motor -V101- with the bracket.