Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Notes
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview (see OVERVIEW - IGNITION SYSTEM ), prior to starting procedure.
Mandatory Replacement Parts
- Seal - Engine speed sensor
Special tools and workshop equipment required
- Elbow Assembly Tool: T10118
- Hex Socket - 4mm: T10370