Engine, Securing To Engine And Transmission Holder
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Engine Sling :2024A
- Holding Fixture :VW540
- Engine and Gearbox Bracket :VAS6095A
- Shop Crane :VAS6100
Procedure
- Transmission separated from engine. Refer to ENGINE AND TRANSMISSION, SEPARATING .
-- Engage the :2024A on engine and on :VAS6100 as shown.
TIP:
The rail with holes must be inserted as shown to align it to the center of gravity of the assembly.
CAUTION:
There Is a Risk of Injury from the Lifted Engine Falling
Parts of the Body Could Be Crushed
- Secure the mounting hooks and pins on the lifting tackle with a securing pin.
-- Lower the engine using the :VAS6100 from the :T10359A .
-- Secure the transmission side of the engine to the :VAS6095A as shown.