Engine Number/Engine Specifications
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Engine Number
- The engine number ("engine codes" and "serial number") are located at the left on the engine/transmission joint -arrow-.
- The engine codes are also stamped on the right side of the cylinder head -2- and on the cylinder block -1-.
- There is also a label located on the upper timing chain cover with the "engine code" and "serial number".
- Engine codes beginning with "C" are four letters long.
- The first three positions of the engine code stand for displacement and the mechanical engine structure. They are stamped in the cylinder block, including the serial number.
- The fourth position represents the engine output and torque and is dependent on the engine control module.
TIP:
The four digit engine code is on the type plate (market-specific), vehicle data label and engine control module.
Component locations of the type plate (market-specific) and vehicle data label.
Engine Specifications
- Engine code allocation. Refer to GENERAL INFORMATION .