Transmission Side Sealing Flange, Removing And Installing, Version B (Oil Side Sealing Lip): Removing
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
- Transmission removed. Refer to S-TRONIC TRANSMISSION, REMOVING AND INSTALLING or AUTOMATIC TRANSMISSION, REMOVING AND INSTALLING .
-- Remove the dual mass flywheel (refer to FLYWHEEL, REMOVING AND INSTALLING ) or the drive plate (refer to DRIVE PLATE, REMOVING AND INSTALLING ).
-- Unhook the intermediate plate from the sealing flange and at the alignment sleeves -arrows-.
-- Remove the bolts -1 through 8-.
-- Pry out the sealing flange.