LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> Q3 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Crankshaft & Cylinder Block (Ea 888 Generation II) (2017 - 2018)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Drive Plate, Removing And Installing >> Drive Plate, Removing And Installing, Dual-Clutch Transmission >> Removing

Drive Plate, Removing And Installing, Dual-Clutch Transmission: Removing

WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
GWWA13-10911Courtesy of AUDI OF AMERICA, LLC

-- Insert the :10-201  to loosen the bolts.

Version 2: 

GWWN13-10563Courtesy of AUDI OF AMERICA, LLC

-- Place the :3067  into the hole on the cylinder block -item B-.

All 

-- Remove the bolts, drive plate and sensor wheel.

scientia non olet · About LEMON Manuals