Drive Plate, Removing And Installing, Automatic Transmission: Removing
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
- The transmission is removed. Refer to TRANSMISSION, REMOVING AND INSTALLING .
Drive Plate, Loosening and Tightening:
-- Insert the :VW558 into the cylinder block and drive plate as shown.
Counterhold tool installation position: -A- to loosen, -B- to tighten.