Ribbed Belt, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to RIBBED BELT, REMOVING AND INSTALLING .
CAUTION:
- Mark the running direction before removal.
- Pay attention to the running direction when reinstalling.
Ribbed Belt Tensioner, Version 1:
-- Pivot the tensioner clockwise in direction of -arrow- and lock using the :T10060A .
-- Remove the ribbed belt.
Ribbed Belt Tensioner, Version 2:
-- Pivot the tensioner clockwise in direction of -arrow- and lock using the :T10060A .
-- Remove the ribbed belt.