Ribbed Belt, Removing And Installing: Installing
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Install the ribbed belt. Refer to Figure.
-- Pivot the tensioner slightly clockwise and remove the :T10060A .
-- Release the tension on the tensioner.
-- Check whether the ribbed belt is routed correctly.
-- Start the engine and check whether the ribbed belt runs correctly.