Balance Shaft, Removing And Installing, Exhaust Side: Removing

WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the balance shaft drive chain. Refer to BALANCE SHAFT DRIVE CHAIN, REMOVING AND INSTALLING .

-- Remove the bolt -1- on the exhaust side balance shaft.

Courtesy of AUDI OF AMERICA, LLC

-- Insert the :T10394/1 from the :T10394 .

Courtesy of AUDI OF AMERICA, LLC

-- Insert the :T10394 and push the sliding sleeve in the direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Install the :T10055 into the :T10394 and remove the balance shaft.

Courtesy of AUDI OF AMERICA, LLC