Overview - Engine Coolant Temperature Sensor
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
- Clip
- O-ring
- Engine Coolant Temperature Sensor on Radiator Outlet -G83-
- Depending on the model there are different component locations
- O-ring
- Always replace after removing
- Coat with coolant
- O-ring
- Always replace after removing
- Coat with coolant
- Bolt
- 4 Nm + 45°
- Always replace after removing
- Engine Coolant Temperature Sensor -G62-
- On transmission side of the cylinder head
- Removing and installing. Refer to Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING .