Overview - Rear Lid Tail Lamps

• LED tail lamps have LED bulbs and are integrated in the tail lamps. The LEDs cannot be replaced; the entire tail lamp must be replaced.

Fig 1: Rear Lid Tail Lamps Exploded View

Courtesy of AUDI OF AMERICA, LLC

1. Tail Lamp
   • In rear lid
   • Removing and installing. Refer to REAR LID TAIL LAMP, REMOVING AND INSTALLING .
2. Seal
   • Self-adhesive
   • Replace if damaged.
3. Grommet
   • Quantity: 2
4. Rear Turn Signal Bulb
   • Left Rear Turn Signal Bulb -M6-
   • Right Rear Turn Signal Bulb -M8-
   • 12 V, 21 W
   • Bulb, replacing. Refer to BULB HOLDER, REMOVING AND INSTALLING .
5. Brake and Tail Lamp Bulb
   • Left Brake/Tail Lamp Bulb -M21-
   • Right Brake/Tail Lamp Bulb -M22-
   • 12 V, 21 W
   • Bulb, replacing. Refer to BULB HOLDER, REMOVING AND INSTALLING .
6. Lamp Socket
   • Removing and installing. Refer to BULB HOLDER, REMOVING AND INSTALLING .
7. Brake and Tail Lamp Bulb
   • Left Brake/Tail Lamp Bulb 2 -M58-
   • Right Brake/Tail Lamp Bulb 2 -M59-
   • 12 V, 21 W
   • Bulb, replacing. Refer to BULB HOLDER, REMOVING AND INSTALLING .
8. Nut
   • Quantity: 3
   • Tightening specification and sequence. Refer to Fig 2
9. Bolt
   • 1 Nm
   • Quantity: 3
10. Cover
    • For the tail lamp

Fig 2: Tail Lamps Tightening Specifications and Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the nuts for the tail lamps to 4 Nm and in the sequence -1, 2 and 3-.