Sliding Bar Ball, Installing
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Camshaft Spacer: T40191
- Protective Eyewear
Installing
CAUTION:
- Wear protective eyewear.
-- Insert the spring -1- in the camshaft.
-- Place the ball -2- on the spring in the camshaft.
-- Push the ball and spring downward in direction of -arrow A- using the : T40191 and hold.
-- Push the sliding bar -3- in direction of -arrow B-.