Cylinder Head, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Refer to OVERVIEW - CYLINDER HEAD .
-- Remove the spark plugs with the : 3122B .
-- Remove the bolts -arrows-.
-- Remove the cylinder head bolts with the : T10070 or : T40270 in the sequence -1 through 10-.
- All hoses and line connections must be loosened.
-- Remove the cylinder head.
-- Lay the cylinder head on a soft surface, such as foam.
- Seal the open channels of the intake and exhaust tract with a clean cloth or with completely clean plugs from the : VAS6122 .