Balance Shaft Drive Chain, Removing And Installing, Engine With One Camshaft Adjuster: Installing

WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Turn the intermediate sprocket and balance shaft to the marks -arrow-, but do not loosen the bolt -1-.

NOTE:

The painted chain links in the balance shaft drive chain must be positioned at the markings on the chain sprockets.

Courtesy of AUDI OF AMERICA, LLC

-- Position the balance shaft drive chain, the painted links -arrows- must be positioned with the markings on the chain sprockets.

-- Install the timing chain guide rail and tighten the bolts -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Install the chain tensioner -1- for camshaft timing chain.

Courtesy of AUDI OF AMERICA, LLC

-- Install the camshaft timing chain. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .