Upper Timing Chain Cover, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi Q3 Quattro, 2018 Audi Q3, 2017 Audi Q3 Quattro, and 2017 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Replace the O-ring after removing.

-- Coat the O-ring with engine oil.

-- Install the upper timing chain cover using the : VAG1783 and : VAG1783/1 . Refer to Figure for the correct tightening sequence.

-- Install the Camshaft Adjustment Valve 1 -N205-. Refer to Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING .

There are additional procedures depending on the model. Refer to TIMING CHAIN COVER, REMOVING AND INSTALLING .