Bearing Bracket, Removing And Installing: Installing

Courtesy of AUDI OF AMERICA, LLC

-- Install the bolts -arrows- and tighten them.

-- Lubricate the hole -arrow- with engine oil.

Courtesy of AUDI OF AMERICA, LLC

-- Mount the bearing bracket and the bolts -arrows- hand-tight.

Courtesy of AUDI OF AMERICA, LLC

-- Depending on the version, remove either the :T40011  or the :T40267  .

-- Tighten the bolts -arrows-. Refer to OVERVIEW - CAMSHAFT TIMING CHAIN .

-- Install the bolt -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Install the control valve -Item 6-  OVERVIEW - CAMSHAFT TIMING CHAIN.

Installation is performed in reverse order of removal, noting the following:

-- Install the upper timing chain cover. Refer to UPPER TIMING CHAIN COVER, REMOVING AND INSTALLING .