Part IV - 1.8L Engine Only
Part I. Refer to Part I .
Part II. Refer to Part II .
Part III. Refer to Part III .
- Turbocharger
- Can only be replaced with exhaust manifold and vacuum diaphragm.
- Removing and installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
- Turbocharger Vacuum Diaphragm
- Checking. Refer to TURBOCHARGER VACUUM DIAPHRAGM, CHECKING .
- Removing and installing. Refer to TURBOCHARGER VACUUM DIAPHRAGM, REPLACING, 1.8L ENGINE ONLY .
- Adjusting. Refer to TURBOCHARGER VACUUM DIAPHRAGM, ADJUSTING, 1.8L ENGINE ONLY .
- Bolt
- 10 Nm
- Nut
- 9 Nm
- Secure with sealing wax; sealing wax. Refer to the parts information.
- Locking Plate
- Always replace
- Knurled Nut
Additional Tightening Specifications
| Component | Nm |
|---|---|
| Right air guide pipe to the oil pan | 10 |
| Air guide pipe to bracket | 10 |