Left Seal, Replacing, AUDI Q3: Removing

-- Left rear wheel, removing

-- Detach the left drive axle from the flange shaft and move it to the side. Refer to Drive Axle Threaded Connection, Loosening And Tightening .

-- Place the : VAS6208  under the rear final drive.

-- Remove the lower section of the : T10037  and attach it to the left flange shaft.

-- Guide the : VW771  with : VW771/13  and : VW771/44  into the hole on the : T10037  .

-- Remove the flange shaft using the : VW771  .

-- Pry off flange shaft seal with the : VW681  .