Front Belt End Fitting, Removing And Installing: Removing

Fig 1: Identifying Belt Relay Cover, Removal

Courtesy of AUDI OF AMERICA, LLC

-- Move the front seat all the way forward.

-- Unclip the cover -1- on the belt relay -arrows- and fold it up.

Fig 2: Identifying Three-Point Seat Belt, Removal

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

The spring -2- will get bent if it is removed incorrectly. Replace the three-point seat belt if the spring gets bent.
Move the spring -2- just far enough until it is possible to unlock the tab on the spring.

-- Release the spring catches -2- by inserting a small screwdriver in the opening in the spring -arrow-.

-- Slide the belt end fitting -3- downward and disengage at the pin -1-.