Overview - Battery (Sedan)

Observe notes on contact corrosion. Refer to CONTACT CORROSION .

Fig 1: Overview Of Battery (Sedan)

Courtesy of AUDI OF AMERICA, LLC

1. Battery
   • In the luggage compartment in the spare wheel well
   • Removing and installing. Refer to BATTERY, REMOVING AND INSTALLING .
2. Screw
3. Nut
   • 6 Nm
4. Fuse Panel A -SA-
   • Disconnecting and connecting. Refer to BATTERY, REMOVING AND INSTALLING .
   • Removing and installing. Refer to Fuse Panel A -SA- IN LUGGAGE COMPARTMENT, REMOVING AND INSTALLING .
5. Positive Terminal Cover
6. Retainer
   • For the vehicle tool kit cover
7. Bolt
   • 18 Nm
8. Mount
   • For the tool kit
9. Cover
   • For the tool kit
10. Nut
    • 4 Nm
    • For the vehicle tool kit cover
11. Screw
    • 18 Nm
12. Negative Terminal Cover
13. Nut
    • 6 Nm
14. Ground Wire with Battery Monitoring Control Module -J367-
    • Disconnecting and connecting. Refer to BATTERY, DISCONNECTING AND CONNECTING .
    • Removing and installing. Refer to GROUND CABLE WITH Battery Monitoring Control Module -J367-, REMOVING AND INSTALLING .
15. Screw
16. Nut
    • 20 Nm
17. Hose for the Central Venting System
18. Bolt
    • 18 Nm
19. Retaining Bracket