Bearing Inner Race Version 2:
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Place the puller -1- on the groove -arrow- of the bearing inner race -2-.
Continuation for All Versions:
-- Clamp the puller on the bearing inner race -2- by turning the :VAS701003/7 with the :VAS701003/5 in the direction of -arrow- and counterhold the :VAS701003/1 with the :VAS701003/4 .
-- Remove the bearing inner race with the :VAS701003/2 from the wheel hub -1-.