Removing Outer CV Joint
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Clamp the drive axle with protective jaws in a vise clamp.
-- Open the clamps.
-- Slide back protective boot.
-- Strike a copper or brass drift -A- on CV joint inner race with a hammer.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Remove joint and protective joint boot.
-- Remove the circlip -1-.
 Courtesy of AUDI OF AMERICA, LLC
|