EVAP Canister Bracket, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Follow all safety precautions. Refer to SAFETY PRECAUTIONS .
-- Follow the guidelines for clean working conditions. Refer to CLEAN WORKING CONDITIONS .
-- Remove the rear left underbody trim panel. Refer to UNDERBODY TRIM PANEL .
-- Remove the bolts -4- from the exhaust system.
-- Remove the exhaust system heat shield. Refer to MOLDINGS, TRIMS, EXTENSIONS AND TRIM PANELS .
-- Remove the EVAP canister. Refer to EVAP CANISTER, REMOVING AND INSTALLING, AUDI A6 HYBRID .
-- Remove the bolts -2-.
-- Remove the bolt -1- and the EVAP canister bracket -3-.