LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> A4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 960 (Cylinder Head, VALVETRAIN- CLAB, CLAA, CDUC, CGQB, CKVB, CKVC, CDUD, CPNB, CTCB, CTCC, CVUA, CVUB) >> Cylinder Head, VALVETRAIN >> Timing Chain Cover >> Timing Chain Cover, Removing And Installing >> Timing Chain Guard Upper Section, Removing And Installing >> Vehicles with Two Turbochargers

Vehicles with Two Turbochargers

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA21-10653Courtesy of AUDI OF AMERICA, LLC

-- Remove bolt -1- in the intermediate pipe.

NOTE:

Ignore item -2-.

-- Loosen the clip -3- and remove the air guide hose.

GWWA21-10656Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- Remove the right guide pipe from the bypass valve, at the same time remove the intermediate pipe -1- from the turbocharger.

-- Move the guide pipe to the side.

-- Remove the bolts -arrows- and the bracket -1-.

GWWA15-11204Courtesy of AUDI OF AMERICA, LLC

-- Loosen bracket -1- and remove bypass valve -2-.

GWWA21-10657Courtesy of AUDI OF AMERICA, LLC

-- Loosen the bolts in sequence -7 to 1-.

-- Carefully loosen the upper timing chain cover from the bond and remove.

GWWA15-10935Courtesy of AUDI OF AMERICA, LLC