Plenum Chamber Cover, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and Note The Following:
NOTE:
Be careful not to damage the plenum chamber cover -2- and the plenum chamber cover with frame -5- for the air intake shroud -4- to prevent water from getting into the A/C unit when the plenum chamber cover is installed -1-.
The plenum chamber cover cowl panel must lock completely into the windshield frame -3-.
The plenum chamber cover must be installed correctly and completely into the mount -arrow- for cowl panel.