Double Clamps (Exhaust)
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Install double clamps so that the bolt ends do not project over lower edge of double clamp.
- Installed position: the threaded connectors face outward.
-- Install double clamps so that the bolt ends do not project over lower edge of double clamp.
- Installed position: the threaded connectors face forward.
-- To remove, remove the diagonal braces for the center and rear mufflers -1 and 2-.
-- Install the diagonal braces. Refer to DIAGONAL BRACES, REMOVING AND INSTALLING .