Removal And Installation
WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Expedition
- 1.
Remove the screw and the LH lower instrument panel finish panel.
- Disconnect the electrical connector.
Navigator
- 2.
Remove the 3 screws and the steering column finish panel.
- Disconnect the electrical connectors.
All vehicles
- 3.
NOTE:
The headlamp switch is removed by releasing the tabs and pushing from behind.
Remove the headlamp switch.
- Disconnect the electrical connector.
- 4.
To install, reverse the removal procedure.