LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> A4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 672 (Exterior Body Panels (Hood, Lids)) >> 55 Hood, Lids >> Hood >> Insulation, Removing And Installing

Insulation, Removing And Installing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Hood Liner
GWWA55-10503Courtesy of AUDI OF AMERICA, LLC
  1. Clip
  2. Hood Lining
    • Installation:

      -- Slide the lining over the tabs on the rear edge into the holes provided on the inner panel.

      -- Slide the tabs on the front edge and the sides into place.

      -- The clips must engage audibly when pressing in.

  3. Door
  4. Clip