Rotary Light Switch -EX1-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and remove the key.
-- Turn the headlamp switch to "0".
-- Pry off the instrument panel side cover -1- using the Trim Removal Wedge 3409 -arrow- and remove it.
-- Release the retaining clips -arrow A- and tilt the Fuse Panel C -SC- -2- in the direction of -arrow B- on the instrument panel central tube -1- and place inward.
-- Reach through the side opening in the instrument panel and push the Light Switch -E1- -1- toward the rear and out of the driver side instrument panel cover -arrow-.
-- Disconnect the connector.