Garage Door Opener Control Head -E284-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and remove the key.
-- Remove the front interior/reading lamp, refer to FRONT INTERIOR LAMP/READING LAMP, REMOVING AND INSTALLING .
-- Remove the Anti-Theft Alarm System Sensor -G578-, if equipped, refer to Anti-Theft Alarm System Sensor -G578-, REMOVING AND INSTALLING .
-- Release the clips -arrows- and remove the Garage Door Opener Control Head -E284- -1- from the front interior lamp/reading lamp -2-.