12 V Socket 3 -U19-, REPLACING: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cigarette Lighter (12V Socket) And Release Tool T40148

Courtesy of AUDI OF AMERICA, LLC

-- Turn off the ignition and remove the key.

-- Open the cover for the right luggage compartment side trim.

-- Disconnect the connector.

-- The release tabs -2- on the cigarette lighter release tool T40148 must engage in the 12 V socket openings -3- -arrow- and the threaded pin -1- must slide down as far as the stop.

-- Open the mount cover -2- and hold it in that position.

Fig 2: Identifying Piston -2- And Release Tabs -1 On Cigarette Lighter Release Tool T40148

Courtesy of AUDI OF AMERICA, LLC

-- Slide the Cigarette Lighter Release Tool T40148 as far as the stop into the 12 V socket -3-.

-- Rotate the thumbwheel -1- on the Cigarette Lighter Release Tool T40148 clockwise as far as the stop.

The piston -2- is pulled upward and the release tabs -1- on the Cigarette Lighter Release Tool T40148 spread -arrows-.

Fig 3: Identifying Release Tool T40148 Operation
Courtesy of AUDI OF AMERICA, LLC

-- Remove the 12 V socket from the mount.