Anti-Theft Alarm System Sensor -G578-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Interior Lamp/Front Reading Lamp Bulbs, Removal

Courtesy of AUDI OF AMERICA, LLC

-- Turn off the ignition and remove the key.

-- Remove the front interior/reading lamp, refer to FRONT INTERIOR LAMP/READING LAMP, REMOVING AND INSTALLING .

-- Release the retaining clips -B arrows- and remove the individual sensor -1- for the anti-theft alarm system from the interior lamp/reading lamp.

-- Free up the wire -2-.

-- Release the clips -A arrows- and remove the Anti-Theft Alarm System Sensor -G578- -3- from the interior lamp/reading lamp.

-- Press the clips to the side -A arrows- and remove the Anti-Theft Alarm System Sensor -G578- -1- from the mount -2-.

Fig 2: Identifying Retaining Clips, Removal

Courtesy of AUDI OF AMERICA, LLC

-- Release the clips -B arrows- and press the anti-theft alarm system individual sensors -3- out of the mount.