Overview - Ignition System
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 9 Nm
- Camshaft Position Sensor -G40-
- Removing and installing. Refer to CAMSHAFT POSITION SENSOR, REMOVING AND INSTALLING .
- O-Ring
- Replace
- Knock Sensor (KS)
- Knock Sensor 1 -G61- (cylinder bank 1), Knock Sensor 2 -G66- (cylinder bank 2)
- Removing and installing. Refer to KNOCK SENSOR, REMOVING AND INSTALLING .
- Bolt
- 20 Nm
- The tightening specification affects the function of the knock sensors.
- Camshaft Adjustment Valve 1 -N205-
- Bolt
- 5 Nm
- O-Ring
- Replace
- Spark Plug
- Replacement interval. Refer to MAINTENANCE INTERVALS (SEDAN)
- Ignition Coil
- Removing and installing. Refer to IGNITION COILS, REMOVING AND INSTALLING .
- Bolt
- 5 Nm
- Wiring Harness
- Camshaft Adjustment Valve 2 -N208-
- Bolt
- 9 Nm
- Engine Speed Sensor -G28-
- Removing and installing. Refer to Engine Speed Sensor -G28-, REMOVING AND INSTALLING .
- O-Ring
- Replace
- Camshaft Position Sensor 2 -G163-
- Removing and installing. Refer to CAMSHAFT POSITION SENSOR, REMOVING AND INSTALLING .
- Bolt
- 9 Nm