Engine Oil Cooler, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications. Refer to OVERVIEW - OIL PAN/OIL PUMP -Tightening Specification .

NOTE:

Replace the seal.

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

-- Install the lock carrier brace. Refer to LOCK CARRIER BRACE, REMOVING AND INSTALLING .

-- Install the After-Run Coolant Pump -V51-. Refer to After-Run Coolant Pump -V51-, REMOVING AND INSTALLING .

-- Check the oil level. Refer to ENGINE OIL, FILLING AND CHECKING LEVEL .

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .