Overview - Ignition System: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, and 2013 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 20 Nm
- Tightening specifications affect function of Knock Sensor (KS)
- Knock Sensor 1 -G61-
- Contacts gold plated
- Removing and installing. Refer to KNOCK SENSOR, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- Camshaft Position Sensor -G40-
- Removing and installing. Refer to CAMSHAFT POSITION SENSOR, REMOVING AND INSTALLING .
- O-Ring
- Replace
- Ignition Coil with Power Output Stage
- Ignition Coil 1 with Power Output Stage -N70-
- Ignition Coil 2 with Power Output Stage -N127-
- Ignition Coil 3 with Power Output Stage -N291-
- Ignition Coil 4 with Power Output Stage -N292-
- Removing and installing. Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .
- Spark Plug
- Removing and Installing, tightening specification. Refer to SPARK PLUGS, REPLACING
- O-Ring
- Replace
- Engine Speed Sensor -G28-
- Removing and installing. Refer to Engine Speed Sensor -G28-, REMOVING AND INSTALLING .
- Bolt
- 4.5 Nm