LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> A4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 539 (Brake System - Hydraulic Components (Sedan) (As Of 09.2011)) >> 47 Hydraulic Components >> Removal And Installation >> Front Brakes, FN-3 >> Bushing And Guide Pins, FN-3 Brakes >> Removing

Bushing And Guide Pins, FN-3 Brakes: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Audi S4, 2013 Audi A4, 2012 Audi S4, 2012 Audi A4, and 2011 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

-- Loosen the brake caliper at the pins -12-.

Fig 1: Identifying Brake Caliper Components
GWWA46-10111Courtesy of AUDI OF AMERICA, LLC

-- Remove the brake caliper.

NOTE:

Do not let the brake caliper hang from the brake hose. Secure it to the body with suitable cable ties or wire. Do not support the weight with the brake hose.

-- Remove the bushing from the brake caliper.

scientia non olet · About LEMON Manuals