Overview - Gearshift Knob And Cover
WARNING: This page is about a different car, the 2013 Audi S4, 2012 Audi S4, 2011 Audi S4, and 2010 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Gearshift Knob
- With shift lever boot
- Removing and installing. Refer to GEARSHIFT KNOB, REMOVING AND INSTALLING .
- Clamp
- Secures the shift lever knob to the shift lever
- Secure using Hose Clip Pliers VAG1275A
- Boot
- Available only together with the support ring, refer to -item 4- Support Ring.
- Remove and install together with the noise insulation. Refer to -item 5- Noise Insulation, and refer to NOISE INSULATION, REMOVING AND INSTALLING .
- Support Ring
- Available only together with the boot, refer to -item 3- Boot.
- Noise Insulation
- Removing and installing. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
- Seal
- Nut
- 8 Nm
- Base Plate
- For the shift lever support
- Shift Lever With Shift Lever Support