Securing On Engine And Transmission Holder

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Engine And Transmission HolderVW6095
Gearbox Support T40206 with T40206/1

Procedure

Fig 1: Secure T40206 To Transmission With Bolts And Tighten It In Assembly Stand

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

There is a risk of breaking the transmission housing.

The transmission must be attached with the four bolts -arrows- and the Transmission Holder, otherwise when the gear set is pressed out the transmission housing can break.

-- Attach the Gearbox Support T40206 using the Gearbox Support - Drilling Template T40206/3 to the transmission -arrows-.

-- Lift the transmission using the Shop Crane VAS6100. Refer to TRANSMISSION, TRANSPORTING .

Fig 2: Lifting Transmission

Courtesy of AUDI OF AMERICA, LLC

-- Place the transmission on the Engine And Transmission Holder VAS6095 with the Gearbox Support T40206