Removal [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedure for the RH and LH sides.
The following procedure is for the LH side.

REMOVE OUTER MIRROR See step 1
REMOVE NO. 2 OUTER MIRROR COVER
1. Remove the 5 screws.
  
  Fig 1: Removing/Installing No. 2 Outer Mirror Cover Screws, Claws And Guides
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disengage the 2 claws and 4 guides and remove the visor assembly.
3. Disengage the 2 guides.
  
  Fig 2: Identifying No. 2 Outer Mirror Cover Guides
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Disconnect the connector and remove the No. 2 outer mirror cover with the side turn signal light assembly as a unit.
  
  Fig 3: Locating Signal Light Assembly Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Disengage the guide and remove the No. 2 outer mirror cover from the side turn signal light assembly.
  
  Fig 4: Identifying Signal Light Assembly Guide
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002