LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> A4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 449 (Lighting System (Interior) (Service Information)) >> FOOTWELL LIGHT (for Front Side) >> Inspection [08/2013 - ] >> Inspection [08/2013 - ]

Inspection [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH 
    1. Connect a positive (+) lead from the auxiliary battery to terminal 2 (B) and a negative (-) lead to terminal 1 (E).
      Fig 1: Identifying Interior Illumination Light Assembly LH Connector End View
      GTY404864Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check that the No. 1 interior illumination light assembly LH comes on.

      OK

      No. 1 interior illumination light assembly LH comes on.

      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (No. 1 Interior Illumination Light Assembly LH)

      If the result is not as specified, replace the No. 1 interior illumination light assembly LH.

  2. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH 
    1. Connect a positive (+) lead from the auxiliary battery to terminal 2 (B) and a negative (-) lead to terminal 1 (E).
      Fig 2: Identifying Interior Illumination Light Assembly RH Connector End View
      GTY404864Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check that the No. 1 interior illumination light assembly RH comes on.

      OK

      No. 1 interior illumination light assembly RH comes on.

      TEXT IN ILLUSTRATION

      *a Component without harness connected
      (No. 1 Interior Illumination Light Assembly RH)

      If the result is not as specified, replace the No. 1 interior illumination light assembly RH.

scientia non olet · About LEMON Manuals