DTC C1451/72: Motor Drive Permission Malfunction [08/2013 - ]: Procedure

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

CHECK BRAKE FLUID LEVEL
1. Check that the brake fluid level is sufficient.
  OK
  
  Brake fluid level is sufficient.
  
  HINT:
  - If the fluid level drops, check for fluid leaks, and repair as necessary.
  - If no fluid leaks exist, add and adjust the fluid level. Refer to ON-VEHICLE INSPECTION [08/2013 - ] .
NG → CHECK AND REPAIR BRAKE FLUID LEAKS OR ADD FLUID

OK: Go to next step
PERFORM AIR BLEEDING
1. Bleed the air from the brake system. Refer to BLEEDING [08/2013 - ] .
  HINT:
  
  If air bleeding has been performed, this DTC will be cleared.
NEXT: Go to next step

RECONFIRM DTC

Check if the same DTC is output. Refer to DTC CHECK / CLEAR [08/2013 - ] .

Result

Result	Proceed to
DTC C1451/72 is output.	A
DTC C1451/72 is not output.	B

B → END

A: Go to next step

CLEAR DTC
1. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2013 - ] .
NEXT → END