LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> A4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 420 (Electronically Controlled Brake System (Diagnostic Codes & Symptom Tests)) >> Electronically Controlled Brake System >> DTC C1442/44: Invalid Data Received from Acceleration Sensor; DTC C1443/34: Invalid Data Received from Yaw Rate Sensor [08/2013 - ] >> Procedure

DTC C1442/44: Invalid Data Received from Acceleration Sensor; DTC C1443/34: Invalid Data Received from Yaw Rate Sensor [08/2013 - ]: Procedure

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2013 - ] .
    2. Check if the same DTC is output. Refer to DTC CHECK / CLEAR [08/2013 - ] .

      Result

      Result Proceed to
      DTCs C1442/44 and C1443/34 are not output. A
      DTCs C1442/44 and/or C1443/34 are output. B

    B → See step   3 

    A → See step   2 

  2. USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2013 - ] 
  3. REPLACE AIRBAG SENSOR ASSEMBLY. Refer to  REMOVAL [08/2013 - ]