Inspection Procedure
WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When replacing the brake actuator (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve. Refer to INITIALIZATION [08/2013 - ] .
HINT:
When C1451/72 is output together with C1345/66 and/or C1368/67, inspect and repair the trouble areas indicated by C1451/72 first. Refer to DTC C1451/72: Motor Drive Permission Malfunction [08/2013 - ] .